User Manual

UAX220v2 & UAX220-Mic
User manual
5
CONTENTS OF THIS PACKAGE
Thank you for purchasing a Digigram UAX220v2 or UAX220-Mic USB audio
device.
The UAX220v2/UAX220-Mic package consists of the following components:
* a UAX220v2 or UAX220-Mic
* the user’s manual at hand.
* a carrying case
Feel free to visit our web site
www.digigram.com to get more technical
information, consult FAQs, and discover our complete and updated audio
product line.
FEATURES
UAX220v2/UAX220-Mic is a stereo audio interface for USB ports (compatible
with USB ports 1.1 and 2.0). It is powered via USB, and does not require any
driver installation (as it is compatible with the USB Audio specification 1.0).
Main hardware features
• 2 balanced analog mono line inputs
∗
, with a maximum input signal of
+22 dBu for UAX220v2, +10 dBu for UAX220-Mic
• 2 balanced analog mono line outputs
∗∗
, with a maximum output signal
of +10 dBu
• Switchable -12 dB input signal level attenuator for UAX220v2, -20 dBu
for UAX220-Mic
• Switchable zero-latency direct hardware monitoring of the inputs on the
outputs
Note: the input monitoring is mixed on the output with the sounds
played by the application.
• Possibility to switch the input monitoring to mono mode
“left channel + right channel”
• Possibility to record both inputs mixed
• 1 stereo headphone output on female ¼ '' jack
with knob for gain adjustment
• A/D and D/A conversions up to 24 bits/48 kHz
∗
can be used with unbalanced signals
∗∗
electronically servo-balanced outputs provide automatic level adjustment to accommodate
either balanced or unbalanced lines