User Manual

PCX-IP LW881e, PCX-IP LW1221e
User’s manual
Qos
In most of the cases, the parameters of the “QoS” page should not be changed. In case you need to modify them, you may refer to
documents available from Axia WEB site.
System parameters
The “System” page allows setting the network parameters of the PCX-IP card. These parameters are the usual parameters of a
network interface like:
● Host name: used to identify the PCX-IP card on the network.
● Network address: IP address of the PCX-IP card on the network. There must be no other node with the same IP address.
● Netmask: mask to identify the sub network the nodes belongs to
● ....
19