User Manual

PCX-IP LW881e, PCX-IP LW1221e
User’s manual
If the card is not displayed:
● Make sure that during the HR runtime installation the “Driver for the HR boards” has been selected in the “Select components”
window.
● Open the Windows Device Manager (from Control Panel, System). The card should be listed in “Sound” or “Sound, video, and
games” controllers. If it is listed with no warning symbol, the card is well recognized by the system. In case there is a warning
symbol : make sure that the card is correctly inserted in the PCI slot, and screwed on the PC chassis.
● If necessary, uninstall the HR runtime package as described in this manual, and re-install it.
If the card is displayed:
● Right click on the icon of the card.
● Select ‘Diagnostics’, and ‘Play Sine’. This plays in loop a sine signal on all the output channels of the card. You can also select ‘Play
file’ to play in loop a file of your choice (PCM only).
If the playback is correct, the card is correctly installed and works.
● To stop the playback, right click on the card icon, and select ‘Stop Activities’.
The DirectSound devices associated to the card are displayed from the Windows Control Panel, Sound.
● Select tab “Audio”, Default device (Playback device, Recording device).
Available DirectSound devices that can be selected from a DirectSound application are:
DirectSound playback devices
DirectSound recording devices
OUT 1+2 (Digigram PCX-IP LW881e) / OUT 1+2 (Digigram PCX-IP LW1221e)
OUT 3+4 (Digigram PCX-IP LW881e) / OUT 3+4 (Digigram PCX-IP LW1221e)
OUT 5+6 (Digigram PCX-IP LW881e) / OUT 5+6 (Digigram PCX-IP LW1221e)
OUT 7+8 (Digigram PCX-IP LW881e) / OUT 7+8 (Digigram PCX-IP LW1221e)
OUT 5.1 (Digigram PCX-IP LW881) / OUT 9+10 (Digigram PCX-IP LW1221e)
OUT 7.1 (Digigram PCX-IP LW881) / OUT 11+12 (Digigram PCX-IP LW1221e)
/ OUT 5.1 (Digigram PCX-IP LW1221e)
/ OUT 7.1 (Digigram PCX-IP LW1221e)
/ OUT 5.1+2 (Digigram PCX-IP LW1221e)
IN 1+2 (Digigram PCX-IP LW881) / (Digigram PCX-IP LW1221e)
IN 3+4 (Digigram PCX-IP LW881)
IN 5+6 (Digigram PCX-IP LW881)
IN 7+8 (Digigram PCX-IP LW881)
IN 5.1 (Digigram PCX-IP LW881)
IN 7.1 (Digigram PCX-IP LW881)
IN 5.1+2 (Digigram PCX-IP LW881)
If the Wave driver has been installed, and for OS older than Windows 7:
● Go to menu <Start>, <Settings>, <Control panel>, <Sound and Multimedia>, tab “Audio”, Default device (Playback device,
Recording device). The card’s channels can be selected. The card can be used with any Wave application.
Available Wave MME devices that can be selected from a Wave MME based application are:
Wave playback devices
Wave recording devices
PCX-IP LW881e (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e 5.1 (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e 7.1 (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e 5.1+2 (Wave) / PCX-IP LW1221e 5.1 (Wave)
/ PCX-IP LW1221e 7.1 (Wave)
/ PCX-IP LW1221e 5.1+2 (Wave)
/ PCX-IP LW1221e 7.1+2 (Wave)
PCX-IP LW881e (Wave) / PCX-IP LW1221e (Wave)
PCX-IP LW881e (Wave)
PCX-IP LW881e (Wave)
PCX-IP LW881e (Wave)
PCX-IP LW881e 5.1 (Wave)
PCX-IP LW881e 7.1 (Wave)
PCX-IP LW881e 5.1+2 (Wave)
When opening the Digigram Wave Mixer application, only one vu-meter is displayed on the selected channel mixer.
13