User Manual

PCX-IP LW881e, PCX-IP LW1221e
User’s manual
Wave driver configuration
In the case the software application exclusively manages PCM audio through the Wave MME interface, the latency of the Wave driver
can be optimized by enabling the option “PCM only” in the Digigram control panel (CPL). To access this control panel, go to <Start>,
<Programs>, <Digigram>, <Digigram Control Center>.
For detailed information on how to use the Digigram control panel, please refer to its online help (“? Help” button).
Removing the driver
Open the Windows Control Panel and double-click on the Add/Remove Software icon or Programs and Features icon,
depending on the Windows flavour.
● Select “Digigram HR Runtime …”, and Change/Remove.
● Select Remove in the HR Runtime window.
● Follow the instructions to finish to remove the driver.
HOW TO CHECK THE INSTALLATION
Once the card and the driver have been installed according to the procedure described in this manual, you can check that the PCX card
is properly installed and works fine as follows.
● From <Start> <Programs> <Digigram>, select <Digigram Control Center>.
● Select the ‘General Information’ tab.
In the “Modules Information” window, you can see the HR Runtime modules that have been installed, and their versions.
● Select the ‘Diagnostics’ tab to display the installed card(s).
12