User Manual

PCX-IP LW881e, PCX-IP LW1221e
User’s manual
Click Finish to complete the driver installation.
X-Topology installation
Under Windows XP and Windows Server 2003, it is possible to install the drivers without the DHS, so that controls like digital levels and
monitoring are accessible from the DirectSound controls. The driver package must then be installed as follows: MsiExec.exe /I abcd.msi
X_TOPOLOGY=1, where “abcd.msi” is to be replaced by the name of the driver package.
ASIO driver configuration
Note: Under 64-bit operating systems, and for most current ASIO applications (e.g. Cubase, Nuendo, etc...) you have
the choice between a 32-bit version and a 64-bit version when installing them. The 64-bit package of HR Runtime
installs both a 32-bit ASIO driver and a 64-bit ASIO driver.
To use the ASIO driver on your PCX sound card, the option “PCM only” has to be enabled from the Digigram control panel (CPL). To
access this control panel, go to <Start>, <Programs>, <Digigram>, <Digigram Control Center>.
To launch the ASIO control panel, go to <Start>, <Programs>, <Digigram>, <Digigram ASIO HR Settings>.
It allows to:
● set/modify the size of ASIO buffers (= latency adjustment)
● select the number of bits per sample (16, 24, 32)
● select the LTC frame rate
● select the I/Os to be used by the application(s)
● enable/disable the hardware monitoring control
● enable/disable the multi-client mode. When enabled, several
applications can access different channels of the card (but
one channel cannot be used by several applications)
For more information on this ASIO control panel, to refer to its
online help.
11