User Manual

D i g i g r a m
6
FEATURES
The LX6464ES is an audio card for PCI bus. It is Universal PCI (32-bit/66
MHz), which means it can be plugged in 32-bit/33 MHz 5 V keyed PCI slots
as well as in 64-bit/66 MHz 3.3 V keyed PCI slots. The cards are also
compatible with PCI-X interfaces.
LX6464ES main hardware features
• 64 EtherSound ES-100 mono inputs at 44.1 kHz or 48 kHz
• 64 EtherSound ES-100 mono outputs at 44.1 kHz or 48 kHz
• 1 standard Word Clock input
Main software features
• Real-time, simultaneous record and playback in PCM (16 and 24 bits)
• Low latency DirectSound and ASIO drivers
EtherSound features
• EtherSound ES-100 compatible
• The card can generate the network audio clock, or it can synchronize on
the network audio clock
• Network clock frequencies supported:
48 kHz if the card is the audio clock source for the network
44.1 kHz or 48 kHz if the card synchronizes on the EtherSound network
• Audio sampling frequencies supported:
48 kHz, 96 kHz, 192 kHz at a network clock frequency of 48 kHz
∗
44.1 kHz, 88.2 kHz, 176.4 kHz at a network clock frequency of 44.1 kHz
∗
Note: the audio sampling frequency defines the number of available
inputs/outputs:
at 88.2 kHz or 96 kHz: 32 inputs and 32 outputs
at 176.4 kHz or 192 kHz: 16 inputs and 16 outputs
To define the audio sampling frequency settings, go to the Digigram control
panel (<Start> <Programs> <Digigram> <Digigram Control Center>).
Please refer to its online help.
∗
For the management of these modes, please refer to the corresponding question on our web
site in the FAQ section