User Manual

D i g i g r a m

HOW TO CHECK THE

INSTALLATION

Once driver and card installed according to the procedure described in this

manual, you can verify that the card works correctly as follows:

• Menu <Start>, <Settings>, <Control panel>, <Sound and

Multimedia>, tab “Audio”, <Default device> (Playback device,

Recording device). Pull-down menus allow for the card’s DirectSound

devices as declared during installation (e.g. “LX6464ES -01 (WDM)” by

default for the card’s first stereo channel). The card can be used with any

DirectSound application (see pages hereafter).

• If the ASIO option has been selected during installation, the card is

visible through any ASIO compliant application.

If the card is not displayed:

• Make sure that the box “Drivers for the LX6464ES board” is checked

in the “Select components” window.

• make sure that the card is correctly inserted in the PCI slot, and screwed

on the PC chassis.

• if necessary, uninstall the driver as described in this manual, and re-

install it.