User Manual

D i g i g r a m

HARDWARE REQUIREMENTS

Minimum requirements

• Pentium III 700 MHz (or equivalent) minimum

• One free PCI (3.3 V or 5 V keyed) or PCI-X slot

Software requirements

To use your VX222HR or VX222HR-Mic, install the driver from the HR

Runtime package version 1.40 or higher. This package includes a

WDM

DirectSound

driver. Microsoft DirectX 9 or a later version must also be

installed. The card can also be used with applications based on Digigram‘s np

SDK

Supported operating systems

VX222HR and VX222HR-Mic cards run under Windows 2000, Windows XP

and Windows Server 2003

and are compatible with the np SDK, and come

along with low-latency DirectSound, Wave, and ASIO drivers.

HARDWARE INSTALLATION

The card has to be installed in the computer prior to installing its driver.

Installing the card

Gently plug the card in a free PCI slot and press it down to position it firmly.

Tighten the screw.

Interrupt and memory address

Hardware interrupt and addresses are automatically set up at start-up by the

PCI PnP BIOS.

SOFTWARE INSTALLATION

Please visit the Digigram web site at www.digigram.com for the most recent

driver.

In case you run a specific application developed or installed by a Digigram

partner, it might require the use of a specific driver version. In this case, make

sure that the updated driver has been approved by your supplier.

32-bit version