User Manual

D i g i g r a m
10
Parameterizing the ASIO driver
To use the ASIO driver on your PCX sound card, the option “PCM only” has
to be activated in the Digigram control panel (CPL). To access this control
panel, go to <Start>, <Programs>, <Digigram>, <Digigram Control
Center>.
Parameterizing the Wave driver
In the case of an application managing exclusively PCM audio, the latency of
the Wave driver can be optimized activating the option “PCM only” in the
Digigram control panel (CPL). With this option enabled, the latency of the
Wave driver is optimized (in this case the PCX on-board MPEG
encoding/decoding is disabled). To access this control panel, go to <Start>,
<Programs>, <Digigram>, <Digigram Control Center>.