User's Manual

LX1616ESe / LX6464ESe
User manual
● If there is another free PCI Express slot, insert the card in it, and power on the computer.
● Check again if the card is detected as decribed above.
● If the card is not detected in any PCI Express slot of this computer, you may try it in another computer.
● If the card is not detected, please contact your card supplier.
Windows XP and Server 2003
Menu <Start>, <Settings>, <Control panel>, <Sound and Multimedia>, tab “Audio”, <Default device> (Playback
device, Recording device). Pull-down menus allow for the card’s DirectSound devices as declared during
installation (e.g. “LX6464ESe -01 (WDM)” by default for the card’s first stereo channel). The card can be used with
any application based on DirectSound or DirectKS (see pages hereafter).
Windows Vista:
<Control Panel>, <Hardware and Sound>, <Sound> (Tab Playback, Recording): the declared devices are
displayed. Check ‘Properties’ and click “Test” button.
● If the ASIO option has been selected during installation, the card is visible through any ASIO compliant
application.
If the card is not displayed:
● Make sure that the golden tracks of the PCI Express connector of the LX card are clean. You may use a dry rag
to clean the connector if it looks a bit dirty.
● Make sure that the card is correctly inserted in the PCI Express slot, and screwed on the PC chassis.
● During the driver installation, make sure that the option “Drivers for the LX6464ESe board” is checked in the
“Select components” window.
● If necessary, uninstall the driver as described in this manual, and re-install it.