User Manual

EtherSound ES881v2, ES1241v2 & ES16161v2
Ethernet Audio Bridges
11
SPECIFICATIONS
Configuration
Size : 43.9 x 482.6 x 297.1 mm 1U 19” rack
Power supply
VAC, 47-63 Hz
tic voltage detection
ARNING module t contains hazardous
voltages.
no user-serviceable parts inside
100 - 240
switching-mode, automa
: Do not open the power supply W . I
There are
Temp / humidity
on-condensing)
perating:
torage:
C / 0% - 95%
0°C / 0% - 95%
(n
O
0°C - 50°
-5°C – 7
S
Power consumption ES881v2 ES1241v2: ES16161v2:
at 240 V
at 100 V
0.06 A
0.12 A
0.06 A
0.12 A
0.07 A
0.14 A
:
Net weight
∼3,1 kg (
∼6.85 lbs)
Inputs/outputs
EtherSound ES881v2 EtherSound ES1241v2 EtherSound ES16161v2
Digital audio 4 stereo inputs 2 stereo inputs 8 stereo inputs
AES/EBU 3
4 stereo outputs 6 stereo outputs 8 stereo outputs
With one hw sample rate converter per input,
conversion ratio 1:3 to 3:1, up to 96 kHz
Impedance
110 Ω
Sampling frequencies
available
48 kHz or 44.1 kHz
Frequency response
10 Hz-21 kHz +/- 0,1 dB
10 Hz-23 kHz +/- 0,1 dB
at 44.1 kHz
at 48 kHz
Connectivity
EtherSound ES881v2 EtherSound ES1241v2 EtherSound ES16161v2
Digital audio 4 female XLR-3 and
4 male XLR-3
2 female XLR-3 and
6 male XLR-3
4 female Sub-D 25
EtherSound 2 female EtherCon RJ45 compatible (connections “IN”/“OUT”)
Control 1 RJ45
GPIO 4 optocoupled inputs and 4 relay outputs on 8-point terminal blocks
Serial ports 1 RS232 on DB9
Synchronization
Clock source
If ‘Clock Source’ in an EtherSound network:
Internal, Word Clock or on ‘AES IN 1’ input
If not ‘Clock Source’: EtherSound network, Word Clock or on ‘AES IN 1’ input
(synchronized on the ‘Clock Source’ clock)