User guide

11
Storing and Adding Freeview Channels
You may need to re-store channels, for example, if a new channel is launched or your aerial is realigned.
■ Press Menu on the remote, use

to select ‘Set Up’ and press to enter.
■ Use ▼ to select ‘Full Channel Search’ and press to confirm you want the search to begin.
Changing TV Channels
To change TV channels, you can perform any of the following operations:
■ Use Ch+ and Ch- to browse up and down the available channels.
■ Select the number of the channel using 0-9 numeric keys.
■ Press Guide to view all available channels. Select the required channel using ▲▼ keys and press to confirm.
Getting Started
10
Once the DVR has been connected to the mains and the TV, the “Welcome” screen will be displayed on the
TV. If this doesn’t appear, press TV/AV or channel 0 on your TV remote. Weekly TV listings will not be
available until the DVR has been installed and powered on overnight to receive an initial download. Quick
Guide listings (now and next programmes) are available from set-up - see page 24 for more details.
■ Press to confirm your aerial is connected to your TV DVR.
■ Please wait while the DVR searches for all available frequencies and channels – this may take a few minutes.
■ All channels found will be automatically stored in numerical order.
■ Once the search is complete, press to start watching digital TV.
■ To view all digital channels found and stored, press Guide on your remote.
■ Use ▲▼ to select a channel and press to watch.
If you don’t think your DVR has found the correct number of channels available, check to see if your aerial needs replacing
or realigning.
■ Press Menu on the remote, use

to select ‘Set Up’ and press to enter.
■ Scroll down using ▼ to select ‘Aerial Alignment’ and press
If the Errors bar for signal strength is over the maximum level, you should contact a local aerial installer or call the
Confederation of Aerial Industries on 0208 902 8990 who will be happy to recommend one.
Getting Started