物料编号 102mm 139mm 此为说明书的封面封底 注：内页印刷请用Word档文件输出菲林 技术要求: 1、成品尺寸：139mm X 102mm 2、材质及要求：封面封底为128g铜版纸，彩色(CMYK)印刷； 内页为80g书写纸，单黑(K)印刷，钉装 3、出菲林见电子文件（如发现电子文件出现有图片或文字 移位现象，以此打印稿为准），如有疑问请及时与工程师联系 4、要求符合ROHS标准 DGP707HA-C 27354909 27354774 说明书 余祥辉 深圳易方数码科技股份有限公司 07/08/09
Precautions z Do not subject the device to severe impact z Do not use the device in extreme hot or cold, dusty or damp conditions. Do not expose it to direct sunshine. z Avoid using the device in strong magnetic field. z Keep the device away from water or other liquids. In the event that water or other liquids enter the device, power off the product immediately, and clean the device with soft cloth. z Do not use chemical solution to clean the device in order to avoid corrosion. Clean it with a dry cloth.
TABLE OF CONTENTS 1 Product Overview................................................................. 2 2 Key Features ........................................................................ 2 3 Package Content.................................................................. 2 4 Buttons & Ports .................................................................... 3 5 Remote Control .................................................................... 4 6 Getting Started ..........................
1 Product Overview The 7" Touch Pad enables you to view your photos on a high-resolution LCD screen. Simply insert a USB flash drive or SD, MMC or MS memory card into the appropriate slot located on the back back the and your pictures will be displayed on the screen. of the of frame 2 Key Features z 7.
4 Buttons & Ports 1 LCD Display 2 Stand 3 4 5 – Confirm selection – Return Left/Previous – Move the cursor left.
5 Remote Control Key SLIDE MODE UP DOWN LEFT/ PREVIOUS RIGHT/ NEXT ENTER ESC SETUP TIME ZOOM ROTATE 6 z Function Turn on or off the screen Enter the slide show mode Set aspect ratio as 4:3, 16:9 & Original Move the cursor up Move the cursor down Move cursor left or Show previous photo Move cursor right or Show next photo Confirm a selection / Start slide show Return / Stop slide show Enter system setting mode Display the calendar / Display the clock Zoom in the photo up to 6X Rotate clockwise 90° Gettin
z Inserting a memory card/USB flash drive The device provides a card slot to support SD/MMC/MS memory cards and a USB port for USB flash drives. Please follow these steps to insert a memory card or USB flash drive: (1) (2) Find the card slot or USB port on the body of the machine. Insert a memory card into the slot with the face toward the back, or insert a USB flash drive into the USB port.
MENU: Display photos Photo Calendar Display calendar Setting 8 System Settings View Photos Step 1: Connect the device to a wall outlet Step 2: Power On Step 3: Insert a USB flash drive into the USB port or a memory card into the card slot. (Note: If you insert both, only pictures stored in the memory device that you inserted last are displayed.) Step 3: Press the UP / DOWN button to select “Photo” and then press the “ ” / “ENTER” button to confirm to start viewing the photos.
Previous/next Press the LEFT button to display the previous photo. Press the RIGHT button to display the next photo. Rotate the picture Press ROTATE on the remote control to rotate the picture clockwise by 90°. Change the Aspect Ratio When you are viewing a photo, repeatedly press the MODE button to change the aspect ratio between 4:3, 16:9 and Original Size. Zoom in Press the ZOOM button on the remote control to zoom in on the picture up to 6X.
Press LEFT, RIGHT, UP and DOWN to select a picture. Press the “ ” / “ENTER” button to confirm your selection and enlarge the photo to full screen. Press the 9 / ESC button to return to the main menu. Calendar The 7” Touch Pad can be used as a tabletop calendar and an alarm clock. To enter the calendar view mode, select the “Calendar” from the main menu, and then press the “ ” / “ENTER” button to confirm. The calendar and the time should display.
Clock View When you are viewing the calendar, you can press the TIME button on the remote control to display the time as a clock. Press the TIME button again to exit from the clock and return to the calendar. 10 System Settings On the main menu, select “Setting” using the “ ” button to enter the system settings. Press the UP / DOWN button to select a setting and press the “ ” / “ENTER” button to confirm the setting. Press the / ESC button to exit from the settings mode.
Set the slide show speed Select “Slide Show Speed” to set time interval between slides. Divide the screen into four display areas Select “Split Screen” and then “ON”. In the slide show mode, the photos will display separately in four areas of the screen. Load to default Select “Reset Settings” to restore the system settings to the default settings. Set Language Select “Language” to set the language in which the on-screen text is displayed.
(1) Press the LEFT and RIGHT button to select among the time setting items – hour, minute, second. Press the UP and DOWN button to set the time. (2) Press the LEFT and RIGHT to select “Save” and then press the “ ” / “ENTER” to confirm the date and time setting. Set the Alarm To enable the alarm, (1) Press UP and DOWN button to select “SetTime/Set Alarm” and then press the “ ” / “ENTER” button to confirm. (2) Press UP and DOWN button to select “Set Alarm”.
button to set the time. (2) Press the LEFT and RIGHT button to select “Save” and then press the “ ” / “ENTER” to confirm the date and time setting. Set Brightness and Contrast Select “Brightness / Contrast” to set the brightness and contrast of the screen. Press the UP/DOWN button to adjust the contrast. Press the LEFT/RIGHT button to adjust the brightness. Set Color and Tint of the image Select “Color/Tint” to set the shade and tint of the image’s color.
12 Technical Specifications Item Description Display 7.0-inch TFT LCD screen USB Interface USB 2.
