Technical information

461www.fagerhult.com • www.fagerhult.co.uk
Dimming
Non-addressable digital control DSI – components
modularDIM Basic smartDIM SM-lp
DSI-AD
smartDIM sensor 2
SMART LS II
Dimmable transformers
Component Output Sec.voltage Dimensions
TE-DC 300 VA 11.9 V 254x147x59 mm 86156
Phase regulators
Component Output VA Load Dimensions
PHD 30–300 Magnetic 220x40x31 mm 86157
PD-TD 30–1000 Magnetic 140x90x59 mm 86138
PAD-TD 30–1000 Electronic 140x90x59 mm 86139
Control unit
Component Channels Luminaires Dimensions
modularDIM Basic 3 3x100 pcs. 90x71x59 mm 86131
DSI-V/T 1 50 pcs. 190x30x28 mm 86109
smartDIM SM-lp 1 25 pcs. 190x30x21 mm 86130
DSI-AD 1 50 pcs. 190x30x28 mm 86134
DSI-Smart multi-sensor 1 4 pcs. Ø 60 mm, h 47 mm 86133
DSI-ADS 1 100 pcs. For DIN rail 86135
Constant light control
Component Connection Dimensions
Smart-LS II PCA-Eco/Excel Ø 18 mm, h 16.1 mm 86158
modularDIM DM modularDIM Basic 17x90x58 mm 86140
Daylight Sensor modularDIM DM Ø 52 mm 86163
Lighting scenes
Component Connection Dimensions
modularDIM SC modularDIM Basic 71x90x59 mm 86141
Multisensor-sensor
Component Connection Dimensions
smartDIM sensor 1 smartDIM SM 30x30x25,2 mm 86159
smartDIM sensor 2 smartDIM SM Ø 60 mm, h 23.2 mm 86142
Daylight Sensor
modularDIM
3-channel control unit for DIN rail
mounting. Common or individual control
of all channels with pushbuttons or occu-
pancy detectors. Can be expanded with
control of 4 lighting scenes (modularDIM
SC) or constant light control (modu-
larDIM DM and Daylight Sensor).
smartDIM SM
Single channel control unit, which can
be mounted in a suspended ceiling or
luminaire. Controlled with a pushbut-
ton in combination with an occupancy
and daylight sensor, where Sensor 1 is
intended for mounting in the luminaire
and Sensor 2 in the ceiling area.
DSI-AD
Single channel control unit, that can
be mounted in a suspended ceiling or
luminaire. Enclosed connections with
strain relief. Potentiometer control with
EN 60929 compliant 1–10 V potentiome-
ter controller, such as Helvar TK4 or Ensto
Busch-Jaeger 2112.
DSI-AD/S
As DSI-AD but designed for DIN rail
mounting. With bracket for DIN rails.
DSI-Smart
Independent multisensor for control of a
maximum of four luminaires. Includes an
occupancy detector, daylight sensor and
receiver for an infrared remote control.
SMART LS II
Daylight sensor that can be connected
directly to PCA-Eco and PCA-Excel bal-
lasts, these are fitted on the luminaire or
directly to the fluorescent lamp using a
clip. Controls one HF-ballast.
Modules for BMS communication
DSI-EIBS
Single channel gateway for EIB to DSI
communication.
DSI-LON/S
3 channel gateway for LonWorks to DSI
communication.
More information is available at
www.ljuskontroll.com



/
  
For more information go to www.barbourproductsearch.info