Technical information

ManualsBrandsDigidim ManualsMusical Instruments505

www.fagerhult.com • www.fagerhult.co.uk458

Dimming

DALI – components

DALI Touch panel DIGIDIM 200-series control panels DIGIDIM 312 multi-sensor

DALI MCU rotary potentiometer

DALI SC – scene module

DIGIDIM 444 – input unit

Components from Helvar

Control panels 200-series (white thermoplastic)

Designation Function

DIGIDIM 126200 Control panel with 8 controls 86143

DIGIDIM 125200 Control panel with 7 controls 86137

DIGIDIM 100200 Control panel with rotary controls 86144

DIGIDIM 111200 Control panel with 2 sliders 86145

Phase regulators

DIGIDIM 452 Leading and trailing edge control, max 1000 W 86146

Multisensor

DIGIDIM 312

For constant light, with occupancy detection and

IR-receiver. Recessed mounting, cut out Ø 55 mm

86122

Power supply

DIGIDIM 402 Supplies max 250 mA to the control circuit 86123

Remote control

DIGIDIM 303 IR-remote control 86121

Relay & input unit

DIGIDIM 494 For max 10 A resistive load or 6 A inductive load 86147

DIGIDIM 444 Input unit for optional switches or other control 86148

Gateways

DIGIDIM 472 Converts DALI to 1–10 V DC, DIN rail mounting 86136

DIGIDIM 410 For connecting a DALI-system to 1–10 V DC 86120

DIGIDIM 430 For connecting a DALI-system to LonWorks 86149

Interface

DIGIDIM 505

Serial interface for PCs. Used together with the Helvar

Toolbox software

86124

Components from Osram

Rotary potentiometer

Designation Function

DALI MCU rotary

potentiometer

Rotary potentiometer with integrated power supply for

25 DALI units. 86212

Note: It is not possible to mix control components from dierent manufacturers

in the same DALI-system.

Components from Fagerhult

Control panels

Designation Function

DALI Touch panel Programmable DALI panel with pushbuttons. 18595

DALI Touch panel

Fagerhult has designed and developed a

pushbutton panel oering unique func-

tions and options. Originally the panel

was developed to meet the requirements

of a hospital environment where the label

on each individual pushbutton needs to

be easy to read.

Pushbuttons for lighting control can be

designed for a variety of environments

and needs. Being able to see the various

functions and which was most recently

activated always comes down to two

fundamental requirements.

A pushbutton panel that has a number

of buttons must have diodes to show the

selected function, as well as clear, legible

text indicating the function of each

button. This panel also has membrane

pushbuttons, which are easy to clean. To

identify each function simply print out

the required text using a labelling device

such as DYMO or Brother, 8 mm text

width. The text strip should be applied

from the reverse side of the panel before

ﬁtting. NB! do not remove the cover strip

on the tape side!

DIGIDIM 200-series panels

Control panels for assembly in standard

pattress boxes. Face of white thermoplas-

tic. The pushbuttons’ or controls’ func-

tions can be programmed to control an

individual luminaire, a luminaire group, a

complete DALI-system or recall a pre-set

lighting scene.

DIGIDIM 452

Digital single channel phase regulator for

incandescent and halogen lamps. Leading

and trailing edge control can be selected

using a switch. Lacks a power source for

DALI. For 230–240 V/50–60 Hz.

DIGIDIM 312 multi-sensor

Multi-sensor with the functions (selecta-

ble) constant light, occupancy detection

and receiver for remote control (IR). The

unit is recess mounted. Hole diameter

55 mm. Sensing range 50–5000 lx, 100

or 40 degrees detection and elliptical

sensing area.

DIGIDIM 444 input unit

The input unit allows the connection of

optional switches or other external con-

nections to a DALI system.

DIGIDIM 402 power supply

Power source for DALI. For DIN rail mount-

ing. 220–240 VAC, 50–60 Hz.

DIGIDIM 303 IR-transmitter

For scene selection and/or channel con-

trol. Can also be used as a programming

unit on installations with luminaires

equipped with a Helvar DIGIDIM system.

Requires the system to be equipped with

Helvar’s wall panel or multisensor with

IR-receiver.

DALI SQM sequence module

For automatic sequence control of DALI

units, e.g. LEDs with RGB colours. The

unit alternates light scenes which must

be pre-programmed using the DALI DI-

GIDIM Toolbox or WinDIM software. The

sequence can be started/stopped by an

external function such as a time switch.

DALI SC

Four scene control module for push-

button mounted in pattress box. Installed

in the pattress box behind the switch.

Suitable push-buttons are standard

momentary heavy current switches from

various suppliers.

DALI GC

Two channel control module for push-

button mounted in a pattress box.

Installed in the pattress box behind the

switch. Suitable push-buttons are stand-

ard momentary heavy current switches

from various suppliers. Capable of ignit-

ing, extinguishing, dimming, addressing

and grouping the DALI system.

DALI PS1

Compact and enclosed power source

for DALI that can be ﬁtted, for example,

in a suspended ceiling. 120–240 V AC,

50–60 Hz.

Rotary potentiometer DALI MCU

Rotary potentiometer with built-in power

supply to 25 DALI devices. Connected

to 230 V and DALI. Two MCU can be

connected to power to a maximum of 50

DALI devices. Four potentiometers can

be connected in parallel for control from

multiple locations. Potentiometers MCU

should not be combined with other DALI

controllers.

Subject to alteration. For further speciﬁ-

cations see www.helvar.com and

www.tridonicatco.com.

Components from Tridonic

Control panels

Designation Function

DALI GC Two channel control module. For use with standard mo-

mentary heavy current switches from various suppliers.

Installed in the same box as the push-button. 86125

DALI SC Control module for four scenes. For use with standard

momentary heavy current switches from various suppli-

ers. Installed in the same box as the push-button. 86126

Power supply

DALI PS1 Supplies 200 mA to the control circuit 86127

DALI sequence module

DALI SQM For automatic sequence control of DALI units, e.g. LEDs

with RGB colours. 86214

Interface

DALI SCI Serial interface for PCs. Used together with the Tridonic

winDIM software. 86129

DALI USB Interface for Tridonic software WinDIM and ConﬁgTool.

Connects to the PC’s USB port. Replaces the previous

DALI SCI except when using the Light Over Time func-

tion. 86182

Note: It is not possible to mix control components from dierent manufacturers

in the same DALI-system.

For more information go to www.barbourproductsearch.info