Technical information
www.fagerhult.com • www.fagerhult.co.uk500
Quick connection system
Dierent makes and models of quick connectors can be used to
simplify the installation of luminaires. The main benet of quick
connection systems is the reduction in installation times for large or
continuous lighting systems. These systems allow a certain degree
of exibility, as it might be easier to move already-connected prod-
ucts without aecting the xed installation.
In order to avoid incorrect connection that could, in a worst-case
scenario, result in connected products becoming damaged or even
dangerous, it is important for the quick connection systems avail-
able on the market to be used correctly, i.e. in the manner intended
and designed for by the manufacturer. For example, a 5-way con-
nector system intended for 3-phase installation must not be used
instead for 1-phase + control cable for dimming. Other connector
types must be used for such systems to prevent incorrect connec-
tion due to mistakes.
Fagerhult oers a range of products with integrated quick con-
nectors. These connectors can either be chassis-mounted or the
luminaire can be supplied with the cable and quick connector ready-
tted. All connectors are tted with locking devices. For products
with quick connectors, refer to the relevant product page.
Parts of our range can be supplied with Linect connectors, Linect
is a new open standard that with use of interface connectors can be
connected to dierent makes of quick connector systems.
Luminaire equipped with chassis connector and T-connector. Power and connection
cables can be fastened after installation using plastic clips. A tool (e.g. screwdriver) is
required to loosen the connectors.
Connection cable. T-connector.
Connection cable. H-connector.
Power cables
Wieland
1-phase system, 3-way connector.
Length 2 m, female 91789
Length 2 m, female + earthed plug 91790
1-phase system + 5-way light-adjustment connector, blue
Length 2 m, female 91022
Connection cables, quick connection system
1-phase system, 3-way connector, white cable with white connectors,
female + male, cable cross section 3×1.5 mm²
Length 1 m 91791
Length 3 m 91793
1-phase system + light adjustment (1–10 V, SwitchDim/DSI, DALI),
5-way connectors, black cable with blue connectors, female + male,
cable cross section 5×1.5 mm²
Length 1 m 91030
Length 3 m 91031
T-connector for branching directly to the chassis connector on the luminaire
1-phase system, 3-way, white 91025
1-phase system + light adjustment (1–10 V, SwitchDim/DSI, DALI),
5-way, blue
91026
For more information go to www.barbourproductsearch.info