Technical information

www.fagerhult.com • www.fagerhult.co.uk472
Dimming
Installation example large oce with e-Sense ActiLume
The investment in enhancing the lighting an oce is a fraction of
the costs of the actual personnel. Using lighting control you can cre-
ate a visual stimulating working environment- while o-setting the
costs with energy savings.
e-Sense luminaires are equipped with their own sensor helping
to save installation time on-site.
Advantages:
Plug connection.•
Automatic switching on.•
Adjustment to a low level (20 %) after 15 minutes.•
Control with pull cord, no need for switches.•
Individual adjustment and on/o.•
Daylight control.•
Occupancy detector.•
Central switching after working hours.•
Easy programming with IR-transmitter.•
Proposal for the installation of control in
an oce
The personal demands for light are as
varied as the number of individuals at
a workplace. With employees regularly
leaving the oce at dierent times light adjustments are require-
ment.
Using the eective e-Sense solution ActiLume in the luminaires,
you get quick and easy installation and programming. Earlier at-
tempts with individual occupancy detection created problems with
extremely dark areas in the oce after some personnel had left for
the day, creating an uneasy feeling for those remaining. With the
correct setting on ActiLume you get a constant basic light of 20 %
on all luminaires at unoccupied workplaces.
Even luminaires that have been manually switched o drop down
to 20 % light after 15 minutes, which creates a good light that saves
energy and light sources.
Programming is easy using IR-transmitter IRT 86155. Central
switching means that no energy is consumed in the form of
standby power. Individual control with a pull switch means the cost
of installing switches in modular walls is eliminated.
Product
Zora Beta 2x35 W with integrated e-Sense ActiLume 28700-308
Zora luminaires with integrated control for individual light above workplaces.
IRT 8010 and IRT 8050
The units have only two buttons, one
to switch on/increase the light level
and one to switch o/reduce the light
level. To adjust the light levels aim the
transmitter towards the ActiLume sensor
in the luminaire. The same control func-
tions are oered by the transmitter IRT
8050 for fixed wall installation.
IRT 8099
Should you require a modified function,
several modes can be programmed
with the help of the remote control
IRT 8099. The system comes with nine
pre-programmed modes for e.g. schools,
corridors, etc.
LRM 8118
If you wish to detect presence over a
greater area, one or more detectors type
LRM 8118 can be connected to one of
the DALI terminals in the luminaire.
No programming or commissioning is
necessary. LRM 8118 is ideally placed in
the ceiling, and has a detection area of
approximately 7x7 metres. LRM 8118 is
only an occupancy detector.
Accessories e-Sense ActiLume
Designation Function
IRT 8010 Remote control with 2 buttons 86153
IRT 8050 Wall mounted remote control with 2 buttons 86151
IRT 8099 Remote control for programming 86155
LRM 8118 External occupancy detector 86152
IRT 8010
IRT 8050
IRT 8099
LRM 8118
For more information go to www.barbourproductsearch.info