Technical information

www.fagerhult.com • www.fagerhult.co.uk470
Pendant 2-lamp luminaire
Choices for occupancy detector:
Automatic ON Automatic OFF (delay •
15 minutes).
Manual ON (with a light level over 600 •
lx) Automatic OFF (delay 15 minutes).
(Always adjusts to low level before
OFF).
Choices for daylight sensor:
Automatic setting to 600 lx.•
Manual setting adjustment.•
Choices for manual control:
Dragdim or retractable switch on/o •
and control.
IR-transmitter on/o and control •
(accessory).
Pendant 3-lamp luminaire
Choices for occupancy detector:
Automatic ON Automatic OFF (delay •
15 minutes).
Manual ON (with a light level over 600 •
lx) Automatic OFF (delay 15 minutes).
(Always adjusts to low level before
OFF).
Choices for daylight sensor:
Automatic setting to 600 lx.•
Manual setting adjustment.•
Choices for manual control:
Dragdim or retractable switch on/o •
and common control of downlight/
uplight.
IR-transmitter on/o and control •
(accessory).
Special functions:
30 % Oset, uplight adjusted to 30 % •
above the downlight with dampening.
The luminaire is not ignited by presence
as sucient light is provided by inciden-
tal daylight.
After the last presence, the light is re-
duced and switched o after 15 minutes.
Dimming
e-Sense ActiLume
ActiLume oers maximal comfort and automatic energy saving.
ActiLume adapts the level of light to the surrounding environment
and when the room is not in use the light is switched o.
ActiLume oers maximum comfort and automatic energy saving.
ActiLume adapts the level of light to the surrounding environment
and when the room is not in use the light is switched o. When the
sensor detects presence, the system automatically switches the
light on. If there is sucient daylight in a room the level is automati-
cally dampened. The light is switched o when the room has been
empty for some time. As light is only on when needed, the system
can give the energy savings up to 75 %.
07:45 am: The luminaire is switched on
with presence as the daylight does not
satisfy the lighting requirements.
Adjustment is performed slowly and
constantly according to a set value. Up-
light is set +30 % above the downlight.
The images below demonstrate the
dierent scenarios which occur during a
working day, while the graph highlights
the changes in energy consumption
within this period.
Lunch: After the last presence is de-
tected, the light is reduced and switched
o after 15 minutes.
Manual or automatic control to satisfy
the lighting requirement.
Night: The oce is in darkness.
Incidental daylight reduces the lumi-
naire light accordingly, also known as
daylight control.
Manual control (touch)
Full manual control via pull
dim in the luminaire or re-
tractive switch on the wall.
Channel B 30 % oset
Channel B has a 30 % oset,
which means that channel B
starts to be regulated when
channel A drops to 70 %.
When channel A is regulated
to 10 %, channel B is then set
to 40 %.
Occupancy detector
Presence control switches
the lighting on and o
automatically. After the last
presence detection the light-
ing is switched o with a 15
minutes delay.
Daylight control
A sensor adapts the lighting
output to the amount of
incidental light (natural light).
If there is no daylight,
this function regulates the
light output to maintain the
required illumination level.
IR-receiver
To control and programme
using the remote control if
required. The remote control
is an accessory.
Energy
100 %
For more information go to www.barbourproductsearch.info