Technical information

465www.fagerhult.com • www.fagerhult.co.uk
Dimming
Sensors for absence dimming
Sensor Novum
Component
Sensor Compact Passage 86225
Flush wall box 86226
Protective guard (not used in combination with flush wall box) 86227
Sensor CP Electronic
Component
Sensor MWS-1/C Sensor for ceiling mounting, detection 10x10 m. 86230
Sensor MWS-1 Sensor for corridors, wall mounting, detection 30x4 m 86231
Mounting frame 86232
Sensor Steinel
Component
Sensor PIR IS3180 86235
Protective guard 86227
Novum Compact Passage
PIR occupancy detector for lighting con-
trol. Designed for ceiling mounting, re-
cessed in a pattress or surface mounted
in a flush wall box. The detection range
of this sensor makes it particularly suit-
able for corridors, though it can also be
used in other environments. A separate
input allows the lighting connector to
be controlled manually via a pushbut-
ton or switch. The occupancy detector is
equipped with a 10–1500 lx light relay,
while the output is designed to suit
HF-ballasts, with current limitation to
prevent high start-up currents. The O
delay can be set from 10 seconds to 20
minutes and also features a self-teaching
function.
• Occupancy detection
• Long, narrow detection area
• On and O delay
• Light sensor 10–1500 lx
• Pushbutton input
Steinel PIR IS3180
The IS3180 is a PIR occupancy detector
for wall mounting and detects moving
people with a range of up to 20 metres in
all directions. Surveillance angle 180° and
can be used both indoors and outdoors,
e.g. in garages, passageways, stairwells,
sports halls and changing rooms.
Detection range: Horizontal 180°, verti-•
cal 90°, 8–20 m max.
Lux threshold setting: 2–2000 lx.•
O delay: 5 sec.–15 min.•
Encapsulation class: IP 54.
CP Electronic
MWS-1/C Sensor
Microwave sensor for external mounting
on walls, especially for corridors. The
sensitivity provides good detection of
up to 30x4 m with the sensor placed
at a height of 2.5 m. No dead fields are
formed. The unit is most easily fitted
to a square frame, order no. 86232. No
components are visible, which lends a
discreet appearance to the unit.
The sensitivity and time can be adjusted
variably under the cover.
CP Electronic
MWS-1 Sensor for corridors
Microwave sensor for external mounting
on walls, especially for corridors. The
sensitivity provides good detection of
up to 30x4 m with the sensor placed
at a height of 2.5 m. No dead fields are
formed. The unit is most easily fitted
to a square frame, order no. 86232. No
components are visible, which lends a
discreet appearance to the unit.
The sensitivity and time can be adjusted
variably under the cover.
Novum Compact Passage
Steinel PIR IS3180
CP Electronic
MWS-1/C
MWS-1 for corridors



/
  
For more information go to www.barbourproductsearch.info