Specifications

Chapter 3: Configuring Video Satellite LE 7
chapter 3
Configuring Video Satellite LE
Configuring Network Settings
The Video Satellite LE system communicates
with the administrator Pro Tools|HD system
over an Ethernet LAN.
Ethernet Interface
On computers with multiple Ethernet inter-
faces, you can select the interface you want to
use to connect the two systems.
To select the Ethernet interface for Video Satellite
LE:
1 On the Pro Tools|HD system, choose Setup >
Peripherals and click Satellites.
2 Under Advanced Network Settings, select the
Ethernet interface from the Interface pop-up
menu.
3 Click OK.
4 Repeat the above steps for the Pro Tools LE
system.
TCP/UDP Port
The two systems need to use the same TCP/UDP
port to communicate. The TCP/UDP port de-
faults to 28282.
If the default port is already in use, or if you
want to set up separate Video Satellite LE, Video
Satellite, or Satellite Link networks, you can se-
lect a different TCP/UDP port for communica-
tion.
To select the TCP/UDP port for Video Satellite LE
communication:
1 On the Pro Tools|HD system, choose Setup >
Peripherals and click Satellites.
2 Under Advanced Network Settings, enter the
TCP/UDP port number you want the system to
use.
3 Click OK.
4 Repeat the above steps for the Pro Tools LE
system.
Connecting a Video Satellite LE
System to a Pro Tools HD System
To connect the Video Satellite LE system to the
administrator Pro Tools HD system, the HD sys-
tem must be designated an administrator system.
The Video Satellite LE system is set up as a satel-
lite system, and then is declared from the ad-
ministrator system.