Specifications

Chapter 3: Configuring Video Satellite LE 7
Chapter 3: Configuring Video Satellite LE
Configuring Network
Settings
The Video Satellite LE system communicates
with the administrator Pro Tools system over an
Ethernet LAN.
Ethernet Interface
On computers with multiple Ethernet interfaces,
you can select the interface you want to use to
connect the two systems.
To select the Ethernet interface for
Video Satellite LE:
1 On the administrator Pro Tools system, choose
Setup > Peripherals and click Satellites.
2 Under Advanced Network Settings, select the
Ethernet interface from the
Interface pop-up
menu.
3 Click OK.
4 Repeat the above steps for the satellite
Pro Tools system.
TCP/UDP Port
The two systems need to use the same TCP/UDP
port to communicate. The TCP/UDP port de-
faults to 28282.
If the default port is already in use, or if you
want to set up separate Video Satellite LE, Video
Satellite, or Satellite Link networks, you can se-
lect a different TCP/UDP port for communica-
tion.
To select the TCP/UDP port for Video Satellite LE
communication:
1 On the administrator Pro Tools system, choose
Setup > Peripherals and click Satellites.
2 Under Advanced Network Settings, enter the
TCP/UDP port number you want the system to
use.
3 Click OK.
4 Repeat the above steps for the satellite
Pro Tools system.
For Video Satellite LE to function properly,
you must select a TCP/UDP port number be-
tween 1024 and 65534.