Specifications

Video Satellite Guide56
The flashing red light indicates recording is in
progress.
4 Click the Record button again (or press the
ESC key) to stop.
Selecting a Portion of Video to Capture
The Mark In and Mark Out controls in the Cap-
ture Tool let you select a portion of video to cap-
ture from the tape.
To select a portion of video to capture:
1 In the Capture Tool, use one of the following
methods to mark the position where you want
the capture to begin:
• Press the Spacebar (or click Play) to start
playback on the VTR, and click Mark In at
the desired position.
• Use the Transport controls to queue the
tape to the position at which you wish to
start capturing, and click Mark In.
• Type a timecode value in the Mark In field.
2 Use one of the following methods to mark the
position where you want the capture to end:
• If the VTR is playing back, click Mark Out
at the desired position.
• Use the Transport controls to queue the
tape to the position at which you wish to
end capturing, and click Mark Out.
• Type a timecode value in the Mark Out
field.
The exact length of the clip to be captured ap-
pears in the Duration display.
3 You ca n al so do t he fol low ing:
• To automatically queue the tape to the Mark
In point, click Go to In.
• To automatically queue the tape to the Mark
Out point, click Go to Out.
• To automatically mark a specific frame (not
to be reflected in the capture), click Mark
Memory.
• To clear any of the Mark In, Mark Out, or
Mark Memory points, click Clear Display
next to the appropriate button.
• To begin capturing at a specific point for a
specific duration, type timecode values in
the Mark In and Duration fields.
• To end capturing at a specific point for a
specific duration, type timecode values in
the Mark Out and Duration fields.
• To begin an open-ended capture with no
definitive stopping point, type a timecode
value in the Mark In field.
During recording, video may appear out of
synchronization with audio. However, au-
dio and video will be synchronized during
playback.
You can capture without first entering an In
point, but this is not advised because of un-
predictable delays between clicking the Re-
cord button and actually capturing video.
Mark In and Mark Out controls
Mark Out
Duration
Mark Memory
Go To Memory
Go to In
Go to Out
Mark In
Clear
Display