Specifications
Chapter 8: TL InTune 63
Meter Display
The Meter selector lets you use a standard needle
style meter or a strobe style display.
To select the Meter display:
■ Select Needle or Strobe from the Meter selec-
tor.
Strobe Display
The Strobe display scrolls to the left when the
tuned note is flat, and to the right when the
tuned note is sharp. When the tuned note is
close to the target note, the strobe slows to a
stop. The information display shows the exact
number of cents sharp or flat from the target
note.
Octave
The octave range of 0–6 displayed in TL InTune
is based on middle C being equal to C4. In chro-
matic presets, you can select the desired tuning
octave from 0–6 using the arrows at each end of
the note display.
Reference Frequency
You can adjust the tuning reference frequency
using the arrows inside the information display.
By default, reference frequency is A=440 Hertz.
Information Display
The LCD style information display in TL InTune
displays the following:
• The reference frequency
• The current note to which TL InTune is
tuning
• The number of cents sharp or flat from the
current note
• The status of any test tones playing
Selecting Meter display, Strobe
TL InTune, Strobe display
Octave buttons
TL InTune, Reference Frequency
Down Octave button
Up Octave button