Specifications

Trillium Lane Labs Plug-ins Guide62
TL InTune Controls and
Displays
Automatic Mode
When Automatic mode is active, TL InTune will
detect the note played and automatically show
the pitch for that note.
To tune to a single note:
■ Click the button for the desired note.
This turns off automatic mode. TL InTune will
now display pitch relative to the selected note
only.
To enable Automatic mode:
■ Click the Auto button to enable Automatic
mode. The Auto button highlights.
Test Tone
TL InTune will generate both sine wave and tri-
angle wave test tones as shown in the tone
menu. The “Audible” tuning tone modulates
the input signal against the reference tone.
To hear a test tone:
1 Select Sine, Triangle, or Audible from the Test
Tone selector.
2 Click the Note button for the desired note.
3 Adjust the Tone Volume slider as desired.
When a test tone is playing, “Tone Playing” ap-
pears in the information display.
Selecting a note
Selecting a test tone
Selecting a test tone note