Specifications
Chapter 7: TL EveryPhase 57
Envelope Section
When you select Envelope as the Modulation
source, Modulation (as shown in the Modula-
tion Meter) is controlled by the audio signal and
the Envelope Detector section controls.
Side-Chain Input
When the Side-Chain Input selector (the key
icon) is enabled, the audio for the Envelope De-
tector is taken from the side-chain input rather
than the current track. Select the Side-Chain In-
put using the Pro Tools key icon at the top of
the plug-in window.
Threshold
The Threshold slider sets the amplitude level re-
quired for the Envelope Detector. The LFO En-
velope Detector light blinks brighter when au-
dio is detected above the threshold.
Attack
The Attack slider sets the attack rate of the Enve-
lope Detector.
Release
The Release slider sets the release rate of the En-
velope Detector.
Envelope section
When the Envelope Detector is not in use,
the controls in this section have no effect on
the sound.
Side-Chain Input selector enabled