Specifications

Trillium Lane Labs Plug-ins Guide56
Manual
When the Manual trigger is selected, the LFO is
triggered manually. This can be especially useful
if you want to trigger the LFO using Pro Tools
automation.
With control surfaces and automation, the
Manual trigger acts like an on/off switch and
triggers the LFO every time it changes state.
Tempo Controls
Link To Tempo
When the Link To Tempo option is enabled, the
LFO rate is set to the Pro Tools session tempo,
and any tempo changes in the session are fol-
lowed automatically. When Link To Tempo is
enabled, the LFO rate slider is ignored and the
tempo displayed in the LCD always displays the
current session tempo.
Duration Selector
The Duration selector works in conjunction
with the session tempo, LFO rate, and Beat
Clock trigger. By default, Duration is set to 1 bar.
At that setting, the LFO cycles once within one
bar. When Duration is set to 1 beat, the LFO cy-
cles within the duration of one beat. When Link
to Tempo is activated, the Duration selector sets
the LFO rate as a function of the tempo of the
Pro Tools session. The Duration selector also
controls how often the Beat Clock trigger is acti-
vated.
Tempo Display
The Tempo Display displays the tempo in BPM.
The value in the Tempo Display can also be ed-
ited directly by clicking it.
Tempo controls
The Link To Tempo control is only avail-
able on Pro Tools 6.1 and later. In earlier
releases of Pro Tools, manually set the LFO
rate to match the session tempo for the
same effect.
Selecting Duration
Tempo Display