Specifications

Trillium Lane Labs Plug-ins Guide54
Modulation Section
Width
The Width slider determines the amplitude of
the modulation sweep. This is displayed graphi-
cally in the modulation meter.
Manual
The Manual slider offsets the modulation
sweep. This is displayed graphically in the mod-
ulation meter.
Source
Click LFO or ENV to select the source for modu-
lation. When the Source is set to LFO, modula-
tion is controlled by the LFO. When it is set to
Envelope (ENV), modulation is controlled by
the Envelope Detector which listens to the au-
dio signal. If the side-chain input in the Enve-
lope section is activated, the side-chain audio is
used instead of the current track.
Direction
Click Up or Down to change the direction of the
modulation.
LFO Section
Rate
The Rate slider adjust the rate of the LFO in
beats per minute. When Link to Tempo is acti-
vated, the slider is ignored and the LCD always
displays the current session tempo.
Modulation section
LFO section
When the Modulation section’s Source is
set to the Envelope (ENV), the controls in
the LFO section have no effect on the cur-
rent sound.