Specifications
Trillium Lane Labs Plug-ins Guide30
sients, or if you need to compensate for the de-
lay inherent in non-close miked recordings
(such as overs for the cymbals). Committed trig-
gers are indicated by a red arrow.
4 If there are some committed triggers that you
do not want to play back, click either Uncommit
or Ignore.
Uncommitted triggers do not playback if Listen
mode is disabled, but do playback if it is enabled
(because they are re-detected in Listen mode, so
a new trigger is generated). Ignored triggers do
not playback regardless of whether or not Listen
mode is enabled. When working with commit-
ted triggers, Listen mode is typically disabled so
that TL Drum Rehab doesn’t reanalyze the selec-
tion’s attack transients and generate new trig-
gers after you have already edited any commit-
ted triggers.
5 Disable Listen mode.
6 For no latency on playback, enabled No La-
tency mode (see “Triggering Controls” on
page 36).
7 Select the desired quantize resolution from
the Quantize To pop-up menu (see “Quantize
To” on page 41).
8 Adjust the Quantize slider to achieve the de-
sired amount of quantization. 100% hard quan-
tizes committed triggers to the selected
Quantize To resolution (for example, sixteenth
notes).
9 Adjust TL Drum Rehab’s playback controls as
desired (see “Playback Controls” on page 36).
10 Once you are satisfied with the result, do one
of the following:
• Bus and record the output of TL Drum Re-
hab to a new audio track.
• Use Bounce to Disk to render the replace-
ment track and import it back into the ses-
sion. For more information on Bounce To
Disk, see the Pro Tools Reference Guide.
• Leave the plug-in inserted and continue to
use it during playback.
For more information on working with com-
mitted triggers, see “Commit” on page 39.
Uncommitted trigger Ignored trigger
When using committed triggers, and bus-
sing and recording TL Drum Rehab to an-
other track, it is strongly recommended that
you set the H/W Buffer Size (Setup > Play-
back Engine) to 2048 samples. This is the
optimal setting for recording TL Drum Re-
hab. Lower buffer settings may result in off-
set triggers.