Specifications

Trillium Lane Labs Plug-ins Guide28
9 Do one of the following:
• To load a DRP file into TL Drum Rehab,
double click the desired DRP file in the Li-
brary browser.
– or –
• To load a sample into TL Drum Rehab, dou-
ble click the desired sample (WAV, AIF, or
SD2) in the Library browser. The sample is
loaded into the currently selected Zone (see
“Velocity Map and Velocity Zones” on
page 35).
10 In the Trigger panel, decrease the Input slider
to lower the volume of the original kick sound,
and increase the Samples slider to increase the
volume of the replacement kick sample. This
way you can effectively augment or replace the
original drum sound with the sampled drum
sound. You can also adjust the Dynamics con-
trol to have the amplitude of the original drum
sound affect the playback amplitude (velocity)
of the sampled drum sound. (For more informa-
tion, see “Playback Controls” on page 36.)
11 In the Pro Tools Transport window, press Re-
turn to Zero, and press Play to begin playback
from the beginning of the track. TL Drum Rehab
plays back the selected drum sample at every de-
tected trigger in the original track, all in real
time.
During playback, you can further adjust
TL Drum Rehab’s playback controls as desired to
get just the right blend between the original
drum sound and the replacement drum sound.
Auto-Audition enabled Selected sample
You can also use the Ducking control to
mask track’s audio with the triggered sam-
ple (see “Playback Controls” on page 36).