Specifications

Chapter 5: TL AutoPan 19
Angle
The Angle slider adjusts the orientation of the
panning field from –90° to +90°. At 0°, the pan-
ning field is oriented strictly left/right. At –90°
or +90°, the panning field is oriented strictly
front/back.
The Angle slider is only available with mono-to-
quad and mono-to-5.0 formats, and a left to
right or right to left path selected.
Place
The Place slider adjusts the front/back place-
ment of the panning field. At 0%, the panning
field is centered front/back. At +100%, it is
placed all the way front. At –100%, it is placed
all the way back.
The Place slider is only available with mono-to-
quad and mono-to-5.0 formats, and a left to
right or right to left path selected.
Spread
The Spread slider opens or constricts the field of
panning. At 100%, the spread of the panning
field is at its greatest. At 0%, the spread of the
panning field is completely constricted, and the
sound is centered and stationary (left/right and
front/back).
The Spread slider is only available with mono-
to-quad and mono-to-5.0 formats, and a circular
path (clockwise or counterclockwise) selected.
Panning Source
Click LFO or ENV to select the source for pan-
ning. When the Source is set to LFO, panning is
controlled by the LFO and its controls (see “LFO
Section” on page 20). When the Source is set to
Envelope (ENV), panning is controlled by the
Envelope Detector and its controls (see “Enve-
lope Section” on page 23). The Envelope Detec-
tor can be triggered by the panned audio signal,
or by a side-chain input (see “Using the Side-
Chain Input” on page 24).
Panner section, mono-to-5.0, left to right path selected
Panner section, mono-to-5.0, clockwise path selected
Panning Source buttons