Specifications

Chapter 4: Synchronic Controls 21
import a 44.1 kHz file into a 96 kHz session, it
will playback at the wrong pitch (it will play
back at tempo since each slice is quantized to
MIDI Beat Clock).
To import a sound into a preset:
1 If necessary, switch the Sound module to Edit
mode (see “Performance and Edit Modes” on
page 13).
2 Select the preset where you want to store the
audio file (loop).
3 Click the Import button. If there is already a
file loaded into the current preset, you will be
prompted to delete it.
4 In the Open dialog, navigate to and select one
or more audio files (loops) for import. Mono
files are imported as mono presets, and dual
mono (.L and .R files) and interleaved stereo files
are imported as stereo presets.
5 Click Open.
To drag and drop audio files into Synchronic:
1 If necessary, switch the Sound module to Edit
mode (see “Performance and Edit Modes” on
page 13).
2 Select the preset where you want to store the
audio file (loop).
3 Open the Workspace, and navigate to and se-
lect one or more audio files (loops) for import.
Mono files are imported as mono presets, and
dual mono (.L and .R files) and interleaved ste-
reo files are imported as stereo presets.
4 Drag the selected audio to the Waveform dis-
play in Synchronic.
Selecting Multiple Files for Import
When multiple files are selected, they are load-
ing into the next available unoccupied presets.
For example, if preset 2 is the selected preset,
and preset 3 and 4 already have sounds loaded,
importing three sound files will load them into
presets 2, 5, and 6.
Additionally, all matching .L and .R files are im-
ported as a stereo Sound preset. For example, se-
lecting Happy.L, Happy.R, Kyne.L and Kyne.R
will load two stereo sounds into the selected pre-
set and the next available preset.
After Loading Sound into Synchronic
The selected file will be loaded into Synchronic
and stored with the preset. The waveform for
the loaded file will appear in the Waveform dis-
play. In Performance mode, the same preset can
be selected for both Sound A and Sound B.
Control-click (Windows) or Command-
click (Mac) Import button to bypass this
prompt.
Shift-click to choose multiple contiguous
files. Control-click (Windows) or Com-
mand-click (Mac) to choose multiple non-
contiguous files.
Dragging and dropping an audio file works
only from the Workspace, and not from Win-
dows Explorer, Mac Finder, or the Edit win-
dow.
Waveform display, stereo file, before slicing