Specifications

Chapter 4: Synchronic Controls 17
chapter 4
Synchronic Controls
Adjusting Synchronic
Parameters
Editing Parameters Using a Mouse
You can adjust rotary controls with a mouse by
dragging horizontally or vertically. Parameter
values increase as you drag upward or to the
right, and decrease as you drag downward or to
the left.
Editing Parameters Using a Computer
Keyboard
Each rotary control has a corresponding param-
eter text field directly below it. This displays the
current value of the parameter. You can edit the
numeric value of a parameter with your com-
puter keyboard.
To type a parameter value:
1 Click on the parameter text that you want to
edit.
2 Change the value.
• Type the desired value.
– or –
• To increase a value, press the Up Arrow on
your keyboard. To decrease a value, press
the Down Arrow on your keyboard.
3 Do one of the following:
• Press Enter on the numeric keyboard to in-
put the value and remain in keyboard edit-
ing mode.
– or –
• Press Enter on the alpha keyboard (Win-
dows) or Return (Mac) to enter the value
and leave keyboard editing mode.
To move forward through the different pa-
rameters, press the Tab key. To move back-
ward, press Shift+Tab.