User guide

Soundcraft 328XD and Digidesign Pro Tools
7
77
7
Enabling Peripherals
From the Setups menu, select Peripherals
In the Peripherals window, select MIDI Controllers.
MIDI Machine Control
In the Peripherals window, select “Synchronization.”
Choose ‘PC-1600’ as the
controller type.
Receive from MIDI channels
15 and 16 respectively.
Send the output of the first device
to ‘328XD channel 15’.
The output of the second device
goes to the phantom unit in OMS.
Pro Tools will respond
to PLAY, STOP and
RECORD commands
without fault. However,
REWIND and FAST
FORWARD commands
are not received well
via MMC, because of
the nature of these
commands. Pro Tools
responds to “ held”
commands, such as a
REW or FF button that
transmits until
released. At this time
MMC does not support
a shuttle “ hold”
function.
Check Machine Control. Set device ID to 127 (all).