User guide

Soundcraft 328XD and Digidesign Pro Tools
23
2323
23
In the Mix window in Pro Tools configure inputs and outputs. For this example setup, choose Inputs as
ADAT#2, Input 3 (Aux 1 send on the 328XD).
Repeat this procedure for the Outputs, sending the output back into channels 31 & 32 on the 328XD
(ADAT#2, output 7 & 8).
Up to 6 of these Aux sends can be configured, and the outputs returned to any channel.
To utilize this system, simply select an active channel and route it to the Aux 1 output. The signal willand
arrive in Pro Tools at the Auxiliary channel created in Step 1 above. Signal level should be indicated in
Pro Tools, and the effected signal will appear back at the 328XD, on channels 31 & 32.