User guide

Soundcraft 328XD and Digidesign Pro Tools
22
2222
22
EXAMPLE SETUP
328XD Setup
Recommended setup involves the Auxiliary Optical Output port on the 328XD. Enter the Tape Port Select
menu. Using your Down cursor, scroll to AUX OPTICAL. Set the Aux Optical port to AUX/MIX as indicated.
This will send signal in the following format: Mix L, Mix R, Aux 1-4, FX-1, and FX-2 dry sends on channels
1-8 respectively.
Next, physically remove the optical out of one ADAT port on the 328XD (for example 25-32), and connect
this cable to the Auxiliary Optical Output port on the 328XD.
Effects ‘Rack’ Setup within Pro Tools
In Pro Tools, launch a session and add 1 monophonic Auxilliary Input.
Display this new Aux track in the Mixing Window in Pro Tools, and add TDM plug-ins as desired.*