Specifications

Chapter 10: PRE Support 63
Mic Preamp Window Controls
Mic Preamp windows provide standard selectors
for PRE controls and other controls in the top
area of the window.
Standard Controls
Refer to “Mic Preamp Controls” on page 61 for a
description of Mic Preamp view controls that are
mirrored in the Mic Preamp window. The fol-
lowing controls are not available in Mic Pre-
amps view:
Input Selector Allows you to change which
channel you wish to assign this track. Changing
the Mic Preamp channel will also change the in-
put of the track.
Gain Level Fader and Field Mic Preamp gain can
be changed by clicking on the fader and moving
the mouse, or by typing a valid gain value in the
field and clicking Enter. Other values will snap
to the closest permitted value (for example, en-
tering 10 will snap to +9 dB).
Target When the Target icon is red, the next
window opened of the same type replaces the
current display. When unlit, the current win-
dow anchors to its current contents and loca-
tion on-screen. Opening additional windows
does not affect anchored windows.
To set an open Mic Preamp window as the Target
window:
 Click to enable the Target (it is red when en-
abled, gray when disabled).
Adjusting Mic Preamp
Controls
To adjust a control on a single channel:
1 Choose View > Mix Window Views > Mic Pre-
amps.
2 Click the Mic Preamp control that you want to
adjust.
Mic Preamp window standard controls
Target
HPF
Insert
Source
Pad
Phase
Input
Gain
Phantom
Power