Specifications

What’s New in Pro Tools 9.042
To use Collection mode:
1 In the Edit window, make an audio selection
on a single track. Make sure the selection’s start
and end points fall cleanly on the beat.
2 In the Beat Detective window, select one of
the following modes:
• Bar|Beat Marker Generation
• Groove Template Extraction
• Region Separation (audio only)
3 Define or capture the selection.
4 Configure the Detection options so the selec-
tion’s peak transients are accurately detected.
5 Click the Collection Mode button.
6 In the Detection (Collection Mode) section,
click Add to add all the current beat triggers to
the collection.
7 Click the Normal Mode button and move the
selection to the next track you want to analyze.
Make sure to keep the selection range constant
for each track.
8 Configure the Detection options so the selec-
tion’s peak transients are accurately detected.
9 Click the Collection Mode button again.
For information on defining a Beat Detec-
tive selection, see the Pro Tools Reference
Guide.
For information on generating beat triggers,
see the Pro Tools Reference Guide.
Press Start+P (Windows) or Control+P
(Mac) to move the selection up, or
Start+Semi-colon (Windows) or Con-
trol+Semi-colon (Mac) to move the selection
down.
With Commands Keyboard Focus enabled,
press “P” to move the selection up, or Semi-
colon (;) to move the selection down. Hold
down the Shift key to retain and add to the
current selection. (See the Pro Tools Refer-
ence Guide for information on enabling
Commands Keyboard Focus.)
For information on generating beat triggers,
see the Pro Tools Reference Guide.