Specifications

What’s New in Pro Tools 9.016
EUCON Support
Pro Tools 9.0 supports “EUCON-aware” control
surfaces. EUCON is a high-speed Ethernet proto-
col that enables control of software applications
such as Pro Tools by EUCON-compatible con-
trollers.
To enable EUCON control in Pro Tools:
1 Choose Setup > Peripherals.
2 Select the Ethernet Controllers tab.
3 Select the Enable EUCON option.
4 Click OK.
When the EUCON option is selected, Pro Tools is
enabled for control by one or more hardware
controllers using the EUCON control protocol.
Enable EUCON option selected in the Ethernet
Controllers page of the Peripherals dialog
For information about setting up Pro Tools
for use with EUCON-compatible controllers,
see the Pro Tools EUCON Guide.