Specifications

What’s New in Pro Tools 9.014
Assign Existing Track from Send or Track
Output
Pro Tools 9.0 lets you assign the output of a
track or send directly to an active audio, Auxil-
iary Input, or Instrument track using any avail-
able internal mix bus.
To assign the output of a track or send to an
available input on an existing track:
1 On an existing track, click the Output selector
for a send or for the track and select Track.
2 From the Track submenu, select the destina-
tion track you want. The destination track must
be set to either an internal mix bus or to No Input
in order to be available for assignment.
Pro Tools automatically routes the track or send
to the input of the selected track using an avail-
able internal mix bus.
Variable Stereo Pan Depth
Pro Tools 9.0 lets you select the pan depth for
stereo output paths. You can set the Pan Depth
in the Session Setup window. The Pan Depth set-
ting lets you set the amount of signal attenua-
tion when a track is routed to a stereo output
and panned to center.
To set the stereo pan depth:
1 Choose Setup > Session to open the Session
Setup window.
2 Select the desired option from the Pan Depth
selector.
Assigning a track output to an existing Auxiliary Input
track
Session Setup window
The Pan Depth setting is a session setting,
which is stored with and recalled from the
session (rather than the system).
On Pro Tools|HD systems only, if the Stereo
Mixer plug-in is installed in the Plug-ins
folder, the Pan Depth setting defaults to
–2.5 dB and cannot be changed. Move the
Stereo Mixer plug-in to the Plug-ins (Un-
used) folder to be able to change the Pan
Depth setting.
Session Setup window