Setup guide

Getting Started with Pro Tools LE & Mbox 2 Mini
16
2 Choose Track > Input Only Monitoring. This lets you listen to your incoming signal so you can
“set your levels.”
3 On the front of the Mbox 2 Mini, turn the Mix knob fully left (counter clockwise).
4 Sing into your mic, and watch the meter in the Pro Tools track while you raise the Input 1
gain knob on the front of the Mbox 2 Mini. Turn it clockwise until you see the on-screen track
meter show green most of the time, or yellow for your louder passages.
• If the track meter shows red, gain is too high; lower the gain knob. If the signal is still too
loud, press the Pad switch on the back panel.
• If you barely see green in the track meter, gain is too low. Don’t move the on-screen fader
to try and adjust your input level, use the front panel Gain knob instead.
Input 1 Gain
Mix
Track meter