Specifications

Mbox 2 Mini Getting Started Guide
26
Default Sample Rate
The Sample Rate setting appears as the default sample
rate when you create a new session. (This setting is
available in the Hardware Setup dialog only when no
session is open.)
To change the default Sample Rate:
1 Choose Setup > Hardware.
2 Select the sample rate from the Sample Rate pop-up
menu.
3 Click OK.
Clock Source
The Pro Tools Hardware Setup dialog is set to Internal,
which supports recording analog signals directly into
Mbox 2 Mini analog inputs 1–2.
Configuring I/O Setup
Using the I/O Setup dialog, you can label Pro Tools LE
input, output, insert, and bus signal paths. The I/O Setup
dialog provides a graphical representation of the inputs,
outputs, and signal routing of the Mbox 2 Mini.
Pro Tools LE has default I/O Setup settings that will get
you started. Use the I/O Setup dialog only if you want to
rename the default I/O paths.
To rename I/O paths in I/O Setup:
1 Choose Setup > I/O.
2 Click the Input, Output, Insert, or Bus tab to display
the corresponding connections.
3 To change the name of a path or subpath, double-
click directly on the Path Name, type a new name for
the path, and press Enter.
4 Click OK.
You can change the sample rate when creating
a new Pro Tools session by selecting a different
sample rate in the New Session dialog. (See the
Pro Tools Reference Guide for details.)
Hardware Setup dialog for Mbox 2 Mini
I/O Setup dialog for Mbox 2 Mini
See the Pro Tools Reference Guide (or choose
Help > Pro Tools Reference Guide) for more
information on renaming I/O paths.