Setup guide

Mbox 2 Micro Setup Guide
34
Optimizing the Plug-in Streaming Buffer Size
(Structure Plug-in Only)
This option appears in the Playback Engine dialog only if one of the Structure sampler instru-
ment plug-in is installed on your system. This option is useful when you are playing samples
from the same drive that contains audio for the current session. When this option is selected,
Pro Tools automatically optimizes the size of the Plug-in Streaming Buffer to facilitate disk ac-
cess from both Pro Tools and Structure. The Plug-in Streaming Buffer Size pop-up menu is un-
available when this option is selected.
To set Pro Tools to optimize the Plug-in Streaming Buffer Size:
1 Choose Setup > Playback Engine.
2 Select Optimize for Streaming Content.
3 Click OK.
Pro Tools Hardware Settings
In the Hardware Settings dialog, Pro Tools lets you set the default sample rate and clock source
for your system, as well as a range of controls specific to each type of audio interface.
Default Sample Rate
The Sample Rate setting appears as the default sample rate when you create a new session.
(This setting is available in the Hardware Setup dialog only when no session is open.)
To change the default Sample Rate:
1 Choose Setup > Hardware.
2 Select the sample rate from the Sample Rate pop-up menu.
3 Click OK.
You can change the sample rate when creating a new Pro Tools session by selecting a different
sample rate in the New Session dialog. (See the Pro Tools Reference Guide for details.)