Setup guide

Chapter 2: Installing Pro Tools on Mac 9
8 If prompted, enter your Administrator password and click OK to authenticate the installa-
tion.
9 Follow the remaining on-screen instructions.
10 When installation is complete, click Restart.
11 When prompted, remove the protective USB dust cap from the Mbox 2 Micro and insert
the USB connector of the Mbox 2 Micro into any available USB port on your computer.
Installation Options
Pro Tools LE Options
To install a subset of Pro Tools software and plug-ins (and associated content), click the reveal
triangle for the Pro Tools LE 8.0 option in the installer, and deselect any of the following op-
tions that you do not want installed.
Application Files (Required for Pro Tools) Installs the Pro Tools application and supporting li-
brary files needed to run Pro Tools. This option also installs the Digidesign CoreAudio Driver.
This option must be selected to install Pro Tools.
DigiRack Plug-Ins Installs free plug-ins including DigiRack plug-ins, free Bomb Factory plug-
ins, Eleven Free, TL Utilities, and Digidesign D-Fi and Maxim plug-ins.
Mbox 2 Micro may not function properly if connected to a USB hub. Connect Mbox 2 Micro to
a separate, dedicated USB port.
If the USB LED on the Mbox 2 Micro does not illuminate after installation, or it is blinking, try
unplugging it from your computer and plugging it back in. If the USB LED still does not illumi-
nate, shut down the computer, disconnect the Mbox 2 Micro and start the computer. Once the
computer has fully restarted, reconnect the Mbox 2 Micro.
If an incorrect output is selected in Pro Tools, the USB LED on the Mbox 2 Micro flashes amber.