Setup guide
Table Of Contents
- Contents
- Welcome to Mbox 2 Micro
- Installing Pro Tools on Mac
- Installing Pro Tools on Windows
- Configuring Your Pro Tools System
- Mbox 2 Micro Hardware Overview
- Configuring AMS (Mac OS X Only)
- Configuring MIDI Studio Setup (Windows Only)
- Hard Drive Configuration and Maintenance
- Troubleshooting
- Resources
Chapter 1: Welcome to Mbox 2 Micro 1
chapter 1
Welcome to Mbox 2 Micro
Welcome to the Mbox
®
2 Micro audio playback system.
Mbox 2 Micro and Pro Tools LE
®
provide your USB-equipped computer with a 1/8-inch stereo
output, which uses high-quality 24-bit, 48 kHz D/A converters. It also provides a headphone
level control. Use the Mbox 2 Micro for monitoring Pro Tools playback when editing and mix-
ing.
Mbox 2 Micro Features
The Mbox 2 Micro provides the following:
•1/8-inch TRS stereo output
• Adjustable level control for output volume
• 24-bit D/A converters, supporting sample rates of 44.1 kHz and 48 kHz
• USB-powered operation
•Lanyard hole
Mbox 2 Micro may not function properly if connected to a USB hub. Connect Mbox 2 Micro to
a separate, dedicated USB port on your computer.
Mbox 2 Micro provides no external input; it is an output only device. Consequently, you cannot
record an external source with the Mbox 2 Micro.
With the Mbox 2 Micro, even though you cannot record an external source, you can bus record
in Pro Tools LE (such as recording the audio output of an instrument plug-in to an audio track).