User`s guide

MachineControl for Pro Tools 5.138
MachineControl 23
and DigiSerial Port 6
MachineControl DeAuthorizer.exe 9
Macintosh system requirements 2
Memory Locations and machine chase 18
midnight 25
N
number of record tracks 24
O
Online
button in Transport 20
toggling 18
on-screen selections 25
P
P2 13
ports
9500/9600 6
determining serial 6
DigiSerial 6
for USD 6
pre-roll
compensating for 11
machine 11
setting for machine from Pro Tools 11
Punch In/Out 24
R
Record Arm buttons 24
Record Mode 25
Record Online at Insertion/Selection 18
Record Online at Time Code (or ADAT) Lock 18
Record Protocol 24
Record Tracks 24
recording with Remote mode 15
Remote mode 11
and track arming 15
Auto Edit 15
commands 14
playback 14
recording 15
transport master 20
troubleshooting 30
Remote Mode 9-Pin Cable
pinout 35
requirements for serial ports 6
S
sample rate 17
search mode 22
cueing 22
Serial Control Cable
pinout wiring diagram 36
serial port requirements 6
serial ports
adaptors 6
with 9500/9600 6
with G3/G4 6
serial time code 18
and Generate mode 19
requirements for 3
servo lock 11
Show Machine Track Arming Window 23
slaved
Remote mode 13
Serial Control mode 20
start time 17
Sync Mode 17
synchronization requirements 3
system requirements 2
T
time code
quick signal test 17
tracks for 25
track arming
and Remote mode 15
ignore 15
using 26
track layout 11
transport
Machine 20
Pro Tools 20
Remote 20
selecting master 20
Transport = Machine 20
Transport = Pro Tools 20
Trimmer
when Transport = Machine 20