User`s guide

Appendix C: Machine IDs 33
appendix c
Machine IDs
The following table lists the machine profiles
supported in MachineControl, by their
Pro Tools hex ID.
Not included are special IDs to support 48-track
arming support.
Machines and Hex ID Numbers
The first 0x signifies hex value. The next four
numbers is the machine ID. The name of the as-
sociated machine follows.
Machines, by ID number
ID number Machine
0x0000 Generic
0x1000 BVU-800
0x101C BVU-950
0x1019 BVU-920
0x1080 BVU-900
0x104C VO-9850
0x1048 VO-9800
0x102C SVO-9600
0x2000 BVW-10
0x2001 BVW-40
0x2002 BVW-11
0x2003 BVW-15
0x2010 BVW-35
0x2020 BVW-60
0x2021 BVW-65
0x2022 BVW-95
0x2023 BVW-96
0x2024 BVW-70
0x2025 BVW-75
0x2125 BVW-75P
0x4000 DVR-10
0x4003 DVR-18
0x4002 DVRC-10
0x4020 DVR-20
0x4022 DVR-28
0xF019 AJ-D350 (D3)
0x3011 DVR-2100
0x3000 DVR-1000
0x0010 BVH-2000
0x0011 BVH-2000
0x0110 BVH-2000 PS
0x0111 BVH-2000 PS
0x0018 BVH-2180
0x0020 BVH-2500
0x0120 BVH-2500 PS
0x0030 BVH-2700
0x0040 BVH-2800
Machines, by ID number
ID number Machine