User`s guide

MachineControl Guide14
6 If you do not want Pro Tools to respond to re-
mote track arming commands, select Ignore
Track Arming.
7 Click OK when you are done.
8 In the Pro Tools Transport window, select Re-
mote as the Transport master.
9 Put Pro Tools online.
Online Status Display
When online in Remote mode, the Online but-
ton flashes until Pro Tools and the machine es-
tablish communication. When MachineControl
and Remote mode are enabled and communica-
tion is established, the Online button will re-
main highlighted.
Alternate Machine Types
By default, MachineControl lets Pro Tools emu-
late a Sony BVW-75 when the ID is 0x2025. If
you use a machine that follows a different 9-pin
command set, you can configure Pro Tools for
its machine description in the Peripherals dia-
log.
To change the emulation type:
1 Choose Operations > Preferences, and select
the MachineControl window.
2 Enter an appropriate hex value for your device
in the Machine Type field. For a listing of sup-
ported machines and their IDs, see Appendix C,
“Machine IDs.”
9-Pin Commands
In Remote Mode, Pro Tools with Machine-
Control can respond to the following 9-pin
commands:
• Play
• Stop
• Pause
• Rewind
• Forward
• Cue To
• Poll Time Code
• Record Arm Track
• Set In/Out Point (for Auto Edit)
• Set Pre/Post Roll (for Auto Edit)
• Perform Auto Edit Record
• Perform Punch-In/Punch-Out Record (re-
quires QuickPunch mode and voices)
• Return Status -Online, State, Tracks Armed
• Servo Lock
• Clear “In” Point
Playback in 9-Pin Remote Mode
Pro Tools will only play back audio when the re-
ceived command requires audio play back at 1X
speed in the forward direction. Reverse playback
and varispeed playback are not supported in
Pro Tools.