Setup guide

3. Press the Output button three times to select Option 4 (indicated by LED 12 being lit in the Metering section).
4. Press the Input button to change the connection mode (LED 4 will be turned off).
5. Press and release the Sample Rate and Clock buttons again to return to normal operation and save the new setting
(if you just power off the new setting will be lost). Now the Analogue inputs will be connected to the lower numbered
MADI channels.
Many other Alpha-Link parameters can be set in diagnostics mode: MADI mode (64 or 56 channels), SMUX mode
on or off for MADI, ADAT or AES/EBU, sample rate conversion on or off for AES/EBU, clock source for external
clock (MADI or WordClock), to name a few. Details are provided in the Alpha-Link User Guide.
Page 5
Press repeatedly
Option 4 selected
Option 4 status changes
Press