Setup guide

Connecting the Delta-Link, Alpha-Links and Pro Tools
Connection Diagram
Clock, MADI and Digilink
(Power connections omitted for clarity)
Clock Connections
Use 75 ohm WordClock cable with BNC connectors to make the following connections:
• WordClock Out from clock master device (e.g. Digidesign Sync I/O) to WordClock In of Alpha-Link 1
• WordClock Out from Alpha-Link 1 to WordClock In of Alpha-Link 2
• WordClock Out from Alpha-Link 2 to WordClock In of Delta-Link
Page 2
75 Ohm WordClock cable
f
rom clock master device
(if available) . This could
be a Digidesign Sync I/O.
MADI cable pairs (Delta-Link
MADI port A to Alpha-Link 1,
Delta-Link MADI port B to
Alpha-Link 2)
Digilink cable (supplied)
connected to Pro Tools HD CORE
card. Use the cable provided for
correct operation.
Digilink cable (supplied)
connected to Pro Tools HD ACCEL
card. Use the cable provided for
correct operation.
Alpha-Link 1
Alpha-Link 2
Delta-Link