Setup guide

Testing the System
The system is now configured to provide 64 inputs and outputs at 44.1 or 48kHz (24 Analogue and 8 AES/EBU or ADAT
i
nputs and outputs per Alpha-Link). Use the following procedures to check that it is working as expected.
Testing the Outputs
•
In Pro Tools, open the Mix window
•
Click ‘New…’ under the Track menu in Pro Tools and use the dialogue to create one Aux Input track
• Insert the Signal Generator (mono) plug-in into the aux input track. You will see signal in the Aux Input track’s meter
• Set the Aux Input track’s input to ‘no input’, and its output to Bus 1
• Click ‘New…’ under the Track menu in Pro Tools and use the dialogue to create 64 mono audio tracks
Page 13